The VW Code Scanner is a tool which is designed to get past the anti-theft software installed in the Volkswagen cars. You may have purchased a new car from the German manufacturer, and when you try to unlock the vehicle's security system, the first thing the security company will do is enter the vehicle identification number (VIN) into their machine.
The VIN scan is used by the anti-theft software, and it has the capability of detecting all of the controls in the vehicle, as well as the detectors on the vehicles. However, since the vehicles are almost identical, the security company has the ability to go through the VIN scanner and identify each individual control on the car.
When you have the code scanner, you will need to insert a blank CD or DVD containing the data CD and the control CD, and then make sure that the alarm is off. You will be able to then hook up the scanner and use it to scan through the VIN. The exact same mechanism will be used in this process as with any other VIN scan, so you can be sure that all of the equipment has been detected.
In order to enter into the data CD and control CD, you will need to enter them directly into the computer. The computer needs to be connected to the internet, and then you will simply need to type in the VIN number in order to access the data. After you have entered the VIN number into the machine, you will be able to see the control panel data on the screen.
As you continue to enter into the machine, you will notice that there are different data pages for each and every specific control. Therefore, before you can be able to access the data that is contained on the page, you will need to disable any of the anti-theft software installed in the vehicle.
In order to disable the anti-theft software in the VW car, you will need to start the computer, and make sure that it is turned off. You will then need to remove the CD and the control CD that are inside the vehicle.
You will also need to remove the drive belt, and replace the entire belt with a new one. This will then allow you to access the data that is contained on the control panel, which is otherwise unreachable.
It is highly important that you are able to remove the cover, and that you are able to open the control panel and physically pull the control panel out. If the cover is still secured, you will need to use a screwdriver, and then unscrew the cover.
Once you have done this, you will be able to see the control panel in its entirety. You will then need to take note of the number on the control panel, and that you are able to match it up with the VIN number of the vehicle.
When you have the data in your hand, you can then decide whether or not to attempt to unlock the vehicle by using the VIN number. If this is the case, you will need to be able to remove the ignition switch, and then attempt to turn the ignition switch on and off.
After you have done this, you will need to hook up the laptop to the PC. Once you have opened the laptop, you will be able to open the PC, and use the AutoIT program, and perform the unlocking process on the vehicle.
In order to help you with the AutoIT procedure, you will need to download the AutoIT program, which is available for free online. After downloading this program, you will be able to launch the program, and then you will be able to carry out the unlocking process in this manner.